Construction Machinery CDM835E features:

Powerful DF Cummins Engine
Pilot Control System
Automatic Leveling
ROPS/FOPS Cabin with Panoramic View
Convenient Maintenance

Overall Data   Steering System
Bucket Capacity (m3) 1.8 Type Hydraulic Load Sensing
Rated Payload(kg) 3500 Cylinders-Bore¡ÁStroke(mm) 2-80¡Á315
Operating Weight(kg) 11620¡À300 Steering Pump Gear Pump
Traction Force(kN) 97¡À3 System Pressure(MPa) 14
Breakout Force(kN) 100¡À3 Flow Rate(L/min/rpm) 88/2200
Travel speeds (km/h): Steering Angle ¡À35¡ã
  I II III Hydraulic System
Forward 6.5 12 32 Lift Cylinders-Bore¡ÁStroke(mm) 2-125¡Á784
Reverse 6.8 12.5 33.5 Tilt Cylinder-Bore¡ÁStroke(mm) 1-140¡Á553
Engine DF CUMMINS 6BT5.9-C130 Model of Working Pump Gear Pump
Rated Power(kW/rpm) 97/2200 Flow Rate(L/min/rpm) 176/2200
Peak Torque(Nm/rpm) 560/1500 System Pressure(MPa) 16
Starting Voltage(V) 24 Pilot Control System Pressure(MPa) 2.5
Drive Train Hydraulic Cycle Time, Rated Load In Bucket(In Second):
Torque Converter Single-stage, Single-turbine, 3-elements Raise(Loaded) Dump Lower(Empty) Total
Torque Ratio 3.45 5.5 1.3 3.7 10.5
Transmission Countershaft Powershift Transmission Electrical System
Gear 3F/3R System Voltage(V) 24
) Pressure of Transmission(MPa) 1.2-1.5 Battery (2 in series)(Ah) 105
Main Reducer Spiral bevel, 1-stage Reduction Lamp Voltage(V) 24
Final Reducer Planetary Reduction Service Refill Capacity
Tire 17.5-25 L-3 12PR Fuel Tank(L) 200
Brake System Hydraulic Tank(L) 200
Service Brake Single Circuit Caliper, Dry Brake Crankshaft(L) 16.3
Setting Pressure (MPa) 0.78 Transmission(L) 36
Parking Brake Flexible Shaft Controlled Caliper Front Axle(L) /Rear Axle(L) 13/13
Air Conditioning System
Heating Capacity(W) 5800(¡À10%)
Cooling Capacity(W) 4500(¡À10%)
   
Standard Optional
Lonking Transmission Log Fork(J)
Lonking Axle Coal Bucket (M)
Pilot Control Quick Change(H )
Standard Bucket  
ROPS/FOPS