Construction Machinery CDM833 features:

Hydraulic Steering System
Powerful Weichai Engine
Anti-abrasion Integral Cutting Edge

Overall Data   Steering System
Bucket Capacity (m3) 1.7 Type   Hydraulic Load Sensor System
Rated Payload(kg) 3000 Cylinders-Bore¡ÁStroke(mm) 2-80¡Á315
Operating Weight(kg) 10300¡À300 Steering Pump Gear Pump 
Traction Force(kN) 97¡À3 System Pressure(MPa) 14
Breakout Force(kN) 100¡À3 Flow Rate(L/min/rpm ) 88/2200
Travel speeds (km/h): Steering Angle ¡À35¡ã
  I II III Hydraulic System
Forward 6.5 12 32 Lift Cylinders-Bore¡ÁStroke(mm) 2-125¡Á784
Reverse 6.8 12.5 33.5 Tilt Cylinder-Bore¡ÁStroke(mm) 1-140¡Á553
Engine WP6G125E22  Model of Working Pump Gear Pump
Rated Power(kW/rpm)  92/2200 Flow Rate(L/min/rpm ) 176/2200
Peak Torque(Nm/rpm) 500/1400-1600 System Pressure(MPa) 16
Starting Voltage(V) 24    
Drive Train Hydraulic Cycle Time, Rated Load In Bucket(In Second):
Torque Converter Single-stage, Single-turbine, 3-elements Raise(Loaded)  Dump Lower(Empty Total
Torque Ratio 3.5 5.5 1.3 3.7 10.5
Transmission Countershaft power shift Transmission Electrical System
Gear 3F/3R System Voltage(V) 24
Pressure of Transmission(MPa) 1.2-1.5 Battery (2 in series)(Ah) 105
Main Reducer Spiral bevel, 1-stage Reduction Lamp Voltage(V) 24
Final Reducer Planetary Reduction Service Refill Capacity
Tire 17.5-25 L-3 12PR Fuel Tank(L) 200
Brake System Hydraulic Tank(L) 200
Service Brake Single Circuit Caliper, Air Brake  Crankshaft(L) 17
Setting Pressure (MPa) 0.78 Transmission(L) 36
Parking & Emergency Brake Flexible Shaft Controlled Caliper  Front Axle(L) /Rear Axle(L) 13/13
Air Conditioning System
Heating Capacity(W) 5800(¡À10%)
Cooling Capacity(W) 4500(¡À10%)
   
Standard Optional
Lonking Transmission Log Fork(J)
Lonking Axle Coal Bucket (M)
Standard Bucket High Dump (G)
  Quick Change(H)